The reason and treatment method of the bottom edge of the plate after the band saw machine saw a. Vice saw blade is too blunt b. The width of the auxiliary saw is not enough or too narrow c. The center lines of the main ...
1. Unfold and lay down the saw blade, and check the curvature of the back edge of the saw blade with a deflection ruler. 2. Put the saw blade or saw blade on the platform, and check the levelness of the front and back si...
Enhancing the hardness of the band saw is a necessary condition for improving the cutting performance. At present, it is technically allowed to harden the cutting part of the band saw blade separately, that is, through t...
There are many ways to dry wood. According to the way the moisture in the wood is discharged, it can be divided into three types: thermal drying, mechanical drying and chemical drying. Thermal drying is a method of break...
When the wood drying equipment is boring materials, because the materials have been left outside for a long time to absorb a lot of water, the spindle will be deformed and cracked during use. Let us introduce the reasons...
There are many wood drying equipment and drying machines used in today’s wood processing plants, both of which have a boring effect and can remove water well. Due to the same effect, many people are confused about the tw...
NanYang company has got the R«&D talents of wood drying with rich wood drying experiences. According to the clients’ different scales, products, drying requirements and place conditions, we can make out the best drying solution for our clients to choose most reasonable drying equipments and make you invest half