The performance and effect of sawing in horizontal band sawing sawing will be affected by the following three main parameters. In the actual production process, the correct adjustment of these parameters should be made a...
1. Serrated tooth saw: The correct choice of sawtooth pitch is as important as the choice of feed rate and sawing speed. Excessive serration can cause the band saw blade to break, the saw marks to bend and the saw teeth ...
Fault performance: The frequent breakage of the band saw blade that was just bought prevented the production from catching up. Later, it was found that many small cracks appeared on the back of the band saw blade, and ea...
First, the operator should be familiar with the general performance and structure of the machine tool, the transmission system and the operating method. The operator must hold a “device operation certificate” to operate ...
1. If everything used in the previous sawing machine is normal, the saw blade has no problem, and the saw blade is inclined due to the replacement of the saw blade, then the biggest possible problem is that it is on the ...
1. Jig Saw The narrower the saw blade, the smaller the radius of the saw curve. According to experience: a 12 mm wide saw blade can cut a curve with a radius of curvature of about 70 mm; a 25 mm wide saw blade can cut a ...
NanYang company has got the R«&D talents of wood drying with rich wood drying experiences. According to the clients’ different scales, products, drying requirements and place conditions, we can make out the best drying solution for our clients to choose most reasonable drying equipments and make you invest half