The importance of saw blades and how to maintain them?

The importance of band saw blade performance
The durability of the saw blade of a band saw refers to the performance of the saw blade to cause fatigue and damage when it resists vibration and variable loads. The high or low durability of the saw blade is not only related to the carbon content, but also related to heat treatment, surface finish and corrosion. When the surface of the saw blade is rough or corroded, the durability of the band saw blade will be reduced by 30-50%. This performance is particularly important for band saw blades. Under normal circumstances, band saw blade cracks are one of the factors worth considering.
The saw blade of woodworking band saw machine should be adjusted properly, and the saw should be started when the sound is normal and there is no danger of stringing. Saw blade tooth side cracks exceeding 1/6 of the width of the saw blade, 1/8 cracks at the joint, two consecutive missing teeth and more than three joints are not allowed to be used. The cracks should be drilled and cut. The size of the log should be adjusted before it is put on the sports car. When sawing old materials, check carefully and remove iron nails and other objects. The log must be close to the pile and the disc, and the crowbar must not be loosened if the hook is not properly hung. During operation, hands and feet are not allowed to extend out of the edge of the sports car to prevent collision.
The durability of the saw blade of a band saw refers to the performance of the saw blade to cause fatigue and damage when it resists vibration and variable loads. This performance is particularly important for band saw blades. Under normal circumstances, band saw blade cracks are one of the factors worth considering. The high or low durability of the saw blade is not only related to the carbon content, but also related to heat treatment, surface finish and corrosion. When the surface of the saw blade is rough or corroded, the durability of the band saw blade will be reduced by 30-50%.
Anti-rust treatment for woodworking band saw machine.
1. Before storage, you should determine whether to use the method of touch-up paint or the method of repainting the whole machine according to the size of the peeling area of ​​the outer surface of the anti-rust paint.
2. The working devices of woodworking band saw machines, such as the screed of the paver, the bucket of the loader, the scraper of the grader, etc., to prevent rust on the bare metal.
Related Suggestion : MF4050 SAW BLADE SETTING MACHINE