What is the cause of the noise in the mobile push table of the band saw machine and how to deal with it?

Update:15-06-2020
Summary:

The reason for the noise in the mobile push table of th […]

The reason for the noise in the mobile push table of the band saw machine:
Excessive dust accumulation Clean and maintain the movable beam box in the swing arm of the machine tool. The dust in the swing arm and the movable beam box is too dusty. Incorrect adjustment of the roller in the swing arm. Clean and maintain the machine tool. Check the dust-proof brush and adjust the roller to the appropriate position. The sawing size of the vertical guide is not correct. The left and right positions of the vertical ruler are displaced.Readjust the left and right positions of the vertical ruler and fasten the size of the sawing with the horizontal guide. The left and right positions of the guide ruler or horizontal ruler and the diagonal dimension of the plate after sawing are too large.
1. The longitudinal ruler is not parallel to the saw blade;
2. The horizontal ruler is not perpendicular to the saw blade;
Solution:
1. Adjust the parallel of vertical scale and saw blade;
2. Adjust the vertical of the horizontal guide and the saw blade.

mj3212b-wood-band-saw-50-inch-matches-mj329-3de-f-automatic-carriage-60-inch