What heat source does large wood dryer equipment use?

Large-scale wood drying equipment adopts energy-saving and environmentally friendly air energy (other name: air source, air source water heater) heat pump heat source. The heat source part of wood drying equipment is high temperature air energy heat pump. The heat pump host configured according to the kiln type load capacity absorbs the heat in the air under the work of the compressor, compresses and vaporizes it into a high-temperature medium of 95-105℃, and uses the patented thermal insulation copper pipe to transfer the heat to the high-efficiency condenser in the kiln to heat the air in the kiln. The average energy-saving efficiency reaches 2.78 (1KW of electric energy can absorb the heat in the air to produce 2.78 times the heating capacity of about 2400 kcal); the drying kiln shell with high thermal insulation effect and professional equipment structure design and reasonable The air energy heat pump is an energy-saving and environmentally-friendly product advocated by the country, without any waste gas or pollution. The auxiliary electric heating system can be used in the wood drying industry to configure the heat source for drying equipment that requires a drying temperature below 78°C. It is especially suitable for use in areas where the average climate temperature is above 15°C. It is also more suitable for areas with high environmental protection requirements and customers who pay attention to energy saving needs. Equipped with a dedicated fan coil, it has obvious energy-saving effect in the wood constant temperature curing and painting room, and it is convenient and safe to use.
Equipment composition: energy-saving and environmentally friendly air energy heat pump heat source wood drying equipment consists of air energy heat pump host, thermal insulation copper pipe, kiln exchanger, stainless steel structure kiln body, kiln door, humidity control system, air circulation system, intake and exhaust system, electricity It is composed of auxiliary system, detection system and control system.
Equipment principle: It uses clean power to drive the compressor to absorb the free heat in the transported air for heating, without manual operation and burning heat; it is currently an energy-saving wood drying equipment on the market. After using 1KW of electric energy to absorb and transport the heat energy in the air, it will produce more than 3KW of heating; it is converted into a high temperature medium of 95-105℃, and it is transported to the high-efficiency condenser in the kiln using a patented thermal insulation copper pipe to exchange heat and heat the air in the kiln to heat the wood. Heating, combining the advantages of conventional and dehumidifying drying, and supporting critical drying process for efficient wood drying.
Equipment benefits:
1. No need for boiler filing, reducing annual inspection costs;
2. There is no need to conduct an environmental assessment, which avoids the expenditure caused by emissions;
3. Reduced boiler workers, no need to hire professional boiler workers' wages;
4. Avoid the hidden danger of fire in boilers and drying kilns;
5. Automatic drying to ensure the drying quality;
6. Transport and collect the inexhaustible air for free heat heating, and the drying cost is low, which is conducive to competition in the same industry.
7. Promote the overall image of the company, be a pioneer in environmental protection, and be an environmentally responsible enterprise with social responsibility;