What are the energy consumption requirements for wood dryers?

Wood dryers play an important role in the wood processing industry, and this kind of equipment consumes a lot of energy and wastes energy, but as long as we take appropriate reduction measures, it will be saved. Here is how to reduce equipment energy consumption : Generally speaking, the energy consumption of a convection dryer is mainly composed of two parts, evaporating water and taking away waste gas. The latter part accounts for about 15% to 40%, and some are as high as 6%. ten.
Wood dryers play an important role in the wood processing industry, and this kind of equipment consumes a lot of energy and wastes energy, but as long as we take appropriate reduction measures, it will be saved. Here is how to reduce equipment energy consumption : Generally speaking, the energy consumption of a convection dryer is mainly composed of two parts, evaporating water and taking away waste gas. The latter part accounts for about 15% to 40%, and some are as high as 6%. ten.
Reducing the temperature of the exhaust gas at the outlet of the drying equipment is hindered by two factors: ensuring the moisture content of the product, the temperature of the exhaust gas at the outlet is too low, the moisture content of the product increases, and the required product moisture content cannot be reached. When the exhaust gas enters the cyclone separator or bag filter, the temperature must be 20-60℃ higher than the dew point.
Reduce heat loss during the drying process; generally speaking, the heat loss of the dryer will not exceed 10%, and if the large and medium-sized production equipment is properly insulated, the heat loss will be about 5%. Therefore, do a good job in the insulation of the drying system, but it is not that the thicker the insulation layer, the better, the thickness of an insulation layer should be determined.
In order to prevent the leakage of the drying system, the blower and the induced draft fan are generally used in series, and the system is operated in a zero pressure state after reasonable adjustments, so as to avoid the drying of the convection dryer due to the leakage of the drying medium or the leakage of ambient air. The thermal efficiency of the machine decreases.

MYHR HEAT PUMP WOOD DRYING KILN