The performance and effect of sawing in horizontal band sawing sawing will be affected by the following three main parameters. In the actual production process, the correct adjustment of these parameters should be made according to the actual situation, which is the best operation of band sawing machine. .
1. Saw belt pitch: First select the type of saw band according to the material of the material, and then select the pitch of the saw band according to the material specifications (diameter or width) from the values listed on the control panel.
2. Saw belt speed: According to the material material specification (diameter or width), it is selected according to the values listed on the control panel. Considering the life of the saw belt, it can generally be reduced by 1 to 2 files. In actual operation, in order to ensure the quality of the sawing and the life of the saw band, the speed of the saw band and the feed rate should be adjusted and coordinated to make it optimally matched.
3. Feed speed: According to the material and specifications of the material, it is selected by the position of the feed handle on the control panel. In fact, it can be judged according to the sawing sound and the shape of the sawdust. In the absence of abnormal sound, the proper feed rate creates significant curled sawdust. If the feed rate is too slow, the sawdust will be powdery, and too short will form short and hot sawdust. This is not normal. When adjusting the feed rate of the horizontal band saw, it should be coordinated with the speed of the saw belt. This band sawing machine can get the best results of cutting.
www.wooddryingkiln.com
English
简体中文
España