The standard problem of wood drying equipment in temperature

Wood drying equipment is a drying equipment that is not deficient in wood processing professions. Although it is dried by high temperature, it also has a customary temperature. The temperature is too high or too low, and it is not good. Let us introduce it below. What is the temperature that the equipment is accustomed to: drying wood requires temperature and humidity. Putting wood is also the key, and different types of drying time are also different.
The use of variable-frequency drive in wood drying equipment greatly saves electrical energy. In boring equipment, the fans generally used are relatively large, and the fans simply work in succession. For example: Aspen with a thickness of 5 cm needs to be around 60-70 degrees, maintain an air humidity of 90-95%, and take 21 hours as the steaming stage. In the boring stage, gradually add the temperature (temperature) to descend the humidity, and then the temperature will reach about 90 degrees, and the air humidity will be 20%-30%, and the whole time will be about 10 days.
Using a frequency conversion device can save 30% of energy saving. After using a frequency converter, the noise of the entire equipment will decrease a lot, and the life of the equipment will also be extended. The equipment can dry the smashed wood powder to make compact boards, and the coal slime dryer can dry the coal slime to make coal pulverized coal. It can be used as another fuel, which not only saves fuel, but also corresponds to the national waste utilization. Call.
The drying skill of wood drying equipment is a skill knowledge. It is not only a matter of using it. The temperature of the equipment can be controlled reasonably, which can not only reduce the occurrence of noise and reduce the appearance of problems, but also extend the application. Time limit and improve work efficiency.