Sawing method for several typical workpieces of band saw

Update:06-07-2018
Summary:

Sawing method for several typical workpieces of band sa […]

Sawing method for several typical workpieces of band sawmill
1. Jig Saw The narrower the saw blade, the smaller the radius of the saw curve. According to experience: a 12 mm wide saw blade can cut a curve with a radius of curvature of about 70 mm; a 25 mm wide saw blade can cut a curve with a radius of curvature of about 250 mm; a 35 mm wide saw blade can cut the radius of curvature A curve of approximately 450 mm; a 50 mm wide saw blade that can cut a curve with a radius of curvature of approximately 800 mm. When sawing a curve with a small radius of curvature with a wide saw blade, you can first saw several radial kerfs and then cut them by curve.
2. Straight angle sawing When sawing a right-angled corner, you can drill a round hole at the corner and then saw it in the direction of the arrow. When the corner is turned to a large area, it can be sawed directly.
3. Bending sawing methods Saw cutting and bending are generally carried out by means of slash sawing. It can also be cut by the curve die, that is, the curve template is applied to the saw ratio, and the processed piece is sent to the curve template to be sawed, and the corresponding curve can be sawed. The curvature of the material should match the width and width of the saw blade.