1. The motor of the band saw shall be inspected and tested regularly, and the qualified test shall be affixed to the qualified label.
2. All the wires should be worn and fixed firmly. There are measures to prevent wear on the outer edge of the vibrating wire. The metal body of the fuselage is well grounded.
3. The mechanical rotating part is well lubricated, without jamming and abnormal sound.
4. The band saw joint is flat, the strip has no crack, the serration is sharp, and there are no two or more consecutive missing teeth.
5, no-load test, check the strip should be no string and obvious shaking.
6. The driven wheel (drive wheel) and the non-working segment saw blade guard are intact.
7, the machine tool should be responsible for the person, regular maintenance, rotating shaft parts regularly lubricated