Do you know what to do after the reliable and reliable wood drying equipment collapses?

The wood drying equipment continues to increase with the amount of wood, but there are also many problems in the process of use. The collapse of the equipment is a very simple problem. Let us introduce the problem of dealing with the collapse of the equipment. Good prevention: the current situation of equipment collapse is a relatively simple problem, that is, a lot of raw material particles fall from the vertical cylinder at one time.
When entering the kiln, ash and smoke will emerge from the sealing ring. In an instant, the raw meal will flow into the firing zone from the kiln end. If the treatment is not done in time, the fired material will be produced. In severe cases, normal production will be affected, and a flame will be ejected from the kiln head. Burn the human body.
Send a special person to handle the cyclone preheater on the vertical cylinder of the equipment, deal with the poor ash removal in time, and regularly hit the cyclone cylinder 1-4 times per shift to prevent the occurrence of ash accumulation. 2. Shorten the surface of the wood drying equipment Refractory bricks are built into a 45°C slope shape, and are troweled with refractory mud to facilitate ash deposition and reduce the amount of ash accumulation.
Wood drying equipment is a very good drying equipment, no matter how good the equipment is, it is inevitable that problems will occur. It is recommended that the relevant staff do a good job of handling all problems that will occur with the equipment, so that problems can be solved in time when they are used in the future. processing.