How to use wood drying equipment

There are many ways to dry wood. According to the way the moisture in the wood is discharged, it is divided into three types: thermal drying, mechanical drying and chemical drying.
Thermal drying is a method of destroying the binding force between water molecules and wood through molecular vibration, so that water molecules are discharged from wood by evaporation or boiling;
Mechanical drying is a method of removing moisture from wood through centrifugal force or pressing;
Chemical drying is a method of using highly absorbent chemicals (such as sodium chloride (Sodium), etc.) to absorb moisture in wood.
Among them, mechanical drying and chemical drying are rarely used except for occasional auxiliary drying methods due to their serious shortcomings. The actual wood drying production (Produce) process adopts the thermal drying method.
The wood drying equipment consists of air energy (other name: air source, air source water heater) heat pump, heat preservation water tank, circulating (continue) water supply system, aluminum (Al) alloy kiln body, kiln door (door lift device), heating It is composed of system, humidity control system, air circulation system, intake and exhaust system, electric auxiliary system, detection system and control system.
Wood drying effect: The hot water after heat exchange by the heat exchanger returns to the heat preservation water tank. At this time, the air energy heat pump continues to heat the recovered hot water, and the heat is used repeatedly. The overall effect can be The whole process saves 22-33% of energy consumption. Air energy heat pump is an energy-saving and environmentally friendly product advocated by the state, without any waste gas and pollution, it is a new type of heat source configuration required for wood drying temperature below 75 °C, especially suitable for use in areas with an average climate temperature above 20 °C, and high environmental protection requirements. Regions and customers who pay attention to energy-saving needs are also more suitable. It can be used in the fields of wood secondary drying and mahogany drying in furniture factories, with obvious energy-saving effect, convenient and safe use. The air energy heat pump heat source sawn timber drying equipment is equipped with a fully automatic control system, which is safe and reliable in operation.