1. If everything used in the previous sawing machine is normal, the saw blade has no problem, and the saw blade is inclined due to the replacement of the saw blade, then the biggest possible problem is that it is on the saw blade. Generally, the quality of the saw blade is relatively large, and more about the saw blade. The problem can be learned from the Longjuxiang website saw blade area.
2. If the factors of the saw blade are excluded, then the other factors must be considered. If there is no problem with the previous saw blade, such as the saw blade tooth type, then this time we must focus on checking the sawing machine and the saw blade. After all, the saw blade needs to be replaced every time. Therefore, related to the saw blade, such as the saw blade is not tight enough, If you give a large amount of factors, you need to pay attention.
3. If the above problems are all ruled out, then it is necessary to consider whether the sawing machine has reached the maintenance period. After all, the accessories of the sawing machine also have a long life. No one knows when it will have problems.
As far as the sawing saw is not properly cut, just look at the following equipment accessories.
1. Guide block spacing 2, guide arm clearance 3, whether the saw frame presents a 90 degree longitudinal vertical.
https://www.wooddryingkiln.com/
English
简体中文
España