How to install or replace saw blades on woodworking band saws？

The installation method of the saw blade is very simple, let's take a look at how to install or replace the saw blade on the woodworking band saw machine.
First open the guard door at the upper and lower positions, loosen the sliding plate fixing screw, turn the lifting hand wheel, lower the upper saw wheel, then the saw blade is loose, take the old saw blade off, and put the new saw blade on the upper and lower saw wheels Above, here we must pay attention not to reverse the direction of the sawtooth. After the saw blade is put on, turn the lifting handwheel to tighten the saw blade, and turn the upper saw wheel to check whether all the saw teeth are exposed on the outside of the saw wheel. If the position is not appropriate, adjust properly until the saw teeth expose the rim, so that the saw blade is replaced. The installation method is similar. Be careful not to be injured by the saw teeth during installation.
The above is the method of installing or replacing the saw blade. Woodworking band saw machine is a commonly used log cutting machine, which can cut logs and boards longitudinally. Its working principle is to wind continuously on two saw wheels through a ring-shaped endless saw blade. Rotation achieves the purpose of sawing wood.
Related Suggestion : MJ319 / 1 HIGH EFFICIENT ENERGE-EFFICIENT DESKTOP WOOD BANDSAW MACHINE 36-INCH